407-119.012 |
Set pump tubings with connectors and insert- and dosing tubing |
407-140.177 |
Impact bead, PTFE coated, 1 piece |
407-140.327 |
Tube to supply bottle |
407-140.328 |
Tube to sample or autosampler |
407-150.920 |
Lower tip, 1 piece, made of titanium |
407-153.018 |
Tweezers titanium top for SSA 6 |
407-153.019 |
Tweezers titanium down for SSA |
407-160.411 |
Replacement-set 2 for scraper |
407-170.052 |
Intake Tubing for acid and reducing agent |
407-170.087 |
Snap-in tube cassette |
407-170.087 |
Snap-in tube cassette |
407-170.097 |
Amalgamation with heating unit |
407-170.528 |
Pre-drying tube (short) |
407-170.529 |
Adapter tube HydrEA |
407-170.530 |
Pump/dosing tube for batch module |
407-170.534 |
Connection tube 2-Valvegroup |
407-170.536 |
Drying tube (large) |
407-170.548 |
Drying-membrane hydrid - new |
407-170.571 |
Reserve bottle reducing agent |
407-170.651 |
Connection tube to Quartzcell |
407-170.654 |
Reagent bottle with lid for HS50 |
407-218.852 |
Polystyrene-sample vials, 1.5 ml |
407-232.376 |
Special oil SE 32 (0.5 l) |
407-232.656 |
Set O-rings for reaction beaker, |
407-232.800 |
Submicro filter 0.01 µm |
407-232.804 |
Input filter / intake filter |
407-233.912 |
Wide neck bottle 1,000 ml (with cap) |
407-233.912 |
Wide neck bottle 1,000 ml (with cap) |
407-233.912 |
Wide neck bottle 1,000 ml (with cap) |
407-29-1100-177-11 |
Rotary plate, position 43-84 |
407-401.036 |
Key 7-40 |
407-401.045 |
Screwdriver 5.5 x 1.0 |
407-401.046 |
Tongs for SSA 6z |
407-401.241 |
6 pieces pump tubings for reducing agent / waste Ismaprene |
407-401.404 |
Tweezers (titanium) |
407-401.734 |
Gas tube 3 x 5 mm, 2 m |
407-402.596 |
Sample tray cover |
407-402.953 |
Rotary plate, position 1-42 |
407-900.001 |
Capillary hose (rinsing bottle - dispenser) |
407-A60.701 |
V24-connecting cable to AAS |
407-A65.019 |
Drying membran with adapter for |
407-A65.025 |
Pipette tip 200 - 1,000 µl |
407-A65.025 |
Pipette tip 200 - 1,000 µl |
407-A65.040 |
Filling for gas liquid separator |
407-A65.064 |
Set tubing coupling (1 piece) |
407-A65.204 |
Set of 2 pieces ring for quartz window |
407-A65.204 |
Set of 2 pieces ring for quartz window |
407-A65.206 |
Set tubing for reaction gas |
407-A65.206 |
Set tubing for reaction gas |
407-A81.021 |
Bag with 2 pieces O-rings for the furnace, ceramic |
702-A54.012 |
Quartz cell without windows |
702-A60.068 |
Pressure tubing for Argon, 5 m |
702-A60.701 |
Modified balance table |
702-A65.010 |
Gas input for Hg |
702-A65.021 |
1 piece PTFE reaction beaker with conical bottom, flange seal |
702-A65.021 |
1 piece PTFE reaction beaker with conical bottom, flange seal |
702-A65.082 |
tubing viton, 5 x 8 mm, 2 m long |
702-A65.091 |
U-tube |
702-A65.140 |
Reactor complete |
702-A65.141 |
PTFE tube with screw |
810-60051-0 |
Hg cell (tulip) |
407-10-1610-679-14 |
Sample compartment windows contrAA 300/600, 1 pair |
407-10-1700-601-10 |
Titan cannula long |
407-110.499 |
Drip pan (novAA 300, |
407-11-0515-011-12 |
dosing/rinsing tube (AS-FD) |
407-11-0515-029-10 |
Wide neck bottle 2,000 ml (with cap), processed |
407-11-0515-055-10 |
tube fixing for sampling arm |
407-11-0515-510-12 |
Sample tray 1 / 139 positions |
407-11-0515-530-12 |
Sample tray 3 / 54 positions |
407-11-0515-610-12 |
Cover sample tray |
407-11-0515-910-11 |
PtRh-Cannula with guiding |
407-11-0515-920-11 |
PtRh-Cannula with guiding (AS-F) |
407-11-0515-930-11 |
Inlet tube nebulizer |
407-11-0515-940-11 |
Inlet tube for rinsing solution |
407-11-0515-950-11 |
Inlet tube “diluent” (AS-FD) |
407-11-0516-028-10 |
Wide neck bottle waste, processed |
407-11-0516-029-10 |
Wide neck bottle for rinsing solution, processed |
407-11-0516-610-10 |
cover sample tray (AS-GF) |
407-11-0516-710-11 |
Sample tray 108 positions |
407-11-0516-910-11 |
tubing guide |
407-11-0516-920-11 |
Dosing tube (AS-GF) |
407-11-0516-940-11 |
Inlet tube “diluent” (AS-GF) |
407-111.001 |
Quartz tube for HPT burner head |
407-111.001 |
Quartz tube for HPT burner head |
407-111.005 |
Set o-rings mixing chamber |
407-111.006 |
Inlet tube |
407-111.008 |
Inlet tube AS51S/AS52S (PTFE) |
407-111.316 |
Screw (PTFE or PP) for Syphon |
407-111.316 |
Screw (PTFE or PP) for Syphon |
407-111.401 |
Mixing chambercontrAA 300: from S/N 1600346 contrAA 700: from S/N 161K0335 |
407-111.402 |
Set o-rings for organic samples |
407-111.407 |
Mixing wing |
407-111.409 |
Knurled screw for mixing-chamber-parts |
407-111.475 |
Mixing chamber plugs |
407-111.501 |
Nebulizer (graphite) |
407-111.860 |
Impact bead |
407-111.865 |
Impact bead |
407-140.014 |
Set Seal ring for siphon and mixing compartment for organic samples (Kalrez) |
407-140.015 |
Sample table, complete |
407-140.030 |
PEEK spray chamber (recommended for difficult sample matrix) |
407-140.031 |
Set -cannula AS52 covered (for intake-and dosing tubing / Pt/Rh) incl. cannula tipguide |
407-140.032 |
Set -cannula AS52s covered (intake and dosing tubing Pt/Rh) |
407-140.192 |
Cannula for intake tubing AS51 |
407-140.329 |
Tube to nebulizer |
407-140.373 |
Inlet Tube (nebulizer - autosampler, PTFE) |
407-140.411 |
Replacement-set 1 for scraper |
407-140.828 |
Tubing set complete PTFE (tubing + y-piece) |
407-142.312 |
Furnace windows contrAA |
407-143.021 |
Set sealing rings |
407-147.520 |
sample tray inset for clinical sample vials (3ml) |
407-150.598 |
Sample compartment windows contrAA 700, 1 pair |
407-1508.108 |
level sensor for organic samples |
407-1508.108 |
level sensor for organic samples |
407-152.020 |
Bag with 3 pieces seal rings 11.6 mm x 1.2 mm for the furnace |
407-152.022 |
Furnace windows, 1 pair (left, right) (ZEEnit 60/65) |
407-152.023 |
10 pieces Z-graphite sample platform (solid), |
407-152.023 |
10 pieces Z-graphite sample platform (solid), |
407-152.300 |
Tool kit ZEEnit |
407-152.307 |
5 pieces Z-graphite sealing cap (solid) |
407-152.314 |
10 pieces Z-graphite tube with PIN-platform, long |
407-152.315 |
10 pieces Z-standard graphite tube |
407-152.316 |
10 pieces Z-standard graphite tube, solid |
407-152.324 |
Set of graphite parts furnace |
407-152.340 |
Z-graphite shroud liquid |
407-152.341 |
Z-graphite shroud, solid |
407-152.342 |
Pair of Z-electrodes (1x above, 1x below) |
407-152.346 |
5 pieces Z-graphite insert |
407-152.540 |
Adjusting aid (external), solid, ZEEnit |
407-152.541 |
Adjusting aid (external), liquid, ZEEnit |
407-152.576 |
Furnace windows, 1 pair (ZEEnit |
407-152.599 |
Adjustment aid (internal), solid, ZEEnit |
407-160.411 |
Replacement-set 2 for scraper |
407-160.411 |
Replacement-set 2 for scraper |
407-170.001 |
set quartz window contrAA 700, 2 pieces |
407-170.167 |
Storage bottle acid |
407-170.531 |
Waste tube |
407-170.532 |
Connection tube Valvegroup |
407-170.535 |
Reactor tube (MFA) 50 cm |
407-170.537 |
Connection tube cell |
407-170.538 |
Connection tube |
407-170.541 |
Sample aspiration hose |
407-170.543 |
Drying tube Hg - new |
407-170.590 |
Gas liquid separator |
407-170.600 |
Set window with ring |
407-170.612 |
Holder for Quartzcell |
407-218.852 |
Polystyrene-sample vials, 1.5 ml |
407-218.852 |
Polystyrene-sample vials, 1.5 ml |
407-230.067 |
Wide neck bottle 750 ml |
407-230.069 |
Dosing syringe 500 µl |
407-230.069 |
Dosing syringe 500 µl |
407-230.072 |
10 pieces PTFE-special vials, 5 ml |
407-230.072 |
10 pieces PTFE-special vials, 5 ml |
407-230.072 |
10 pieces PTFE-special vials, 5 ml |
407-230.073 |
10 pieces PP-sample vials, 5 ml |
407-230.073 |
10 pieces PP-sample vials, 5 ml |
407-230.073 |
10 pieces PP-sample vials, 5 ml |
407-230.075 |
10 pieces PTFE- sample vials, 2 ml |
407-230.075 |
10 pieces PTFE- sample vials, 2 ml |
407-230.075 |
10 pieces PTFE- sample vials, 2 ml |
407-230.078 |
Set tubing guide (Ti cannula with |
407-232.274 |
Silicon tubing |
407-232.358 |
Waste tube Tygon (1,5 m) |
407-232.379 |
PTFE Dosing tube ( bottle valve - cannula ) |
407-232.384 |
Tip guide part for AS51s without cannula |
407-232.391 |
Sample tray 53 positions for cups with 18 ml, metal Teflon coated |
407-232.392 |
Sample hood |
407-232.393 |
50 pieces PP- sample cups, 8 ml |
407-232.394 |
50 pieces PP-sample cups with 18 ml |
407-232.656 |
Set O-rings for reaction beaker, |
407-232.656 |
Set O-rings for reaction beaker, |
407-233.864 |
Set of 10 pieces PTFE-collar, NS |
407-233.865 |
Set of 10 pieces PTFE-collar, NS |
407-233.906 |
6 pieces pump tubing for acid and reducing agent |
407-233.907 |
6 pieces pump tubing for sample |
407-233.909 |
12 pieces pump tubing for waste, tygon, violet/orange/violet d = |
407-233.912 |
Wide neck bottle 1,000 ml (with cap) |
407-233.916 |
12 pieces pump tubing for reducing agent / Batch-mode, Tygon, violett/violett |
407-400.007 |
Sample tray 49 positions for cups with 30 ml, metal teflon coated (replacement for old autosampler |
407-400.052 |
100 pieces sample vials - clinical, 3 ml, conical |
407-400.054 |
50 pieces Sarstedt PP- sample cups with 30 ml |
407-400.054 |
50 pieces Sarstedt PP- sample cups with 30 ml |
407-400.057 |
100 pieces Sarstedt PP- sample vials, 15 mL |
407-400.057 |
100 pieces Sarstedt PP- sample vials, 15 mL |
407-400.354 |
Dosing syringe 5 ml |
407-400.380 |
Tongs for SSA 5 |
407-400.409 |
Mechanic’s mirror |
407-400.545 |
Micro spatula |
407-400.707 |
Wide neck bottle 2,000 ml (with cap) |
407-400.707 |
Wide neck bottle 2,000 ml (with cap) |
407-400.850 |
Sample tray for SSA 51, SSA 61/ |
407-401.037 Extension 1/4" |
|
407-401.039 |
Change-over ratchet |
407-401.044 |
Connecting cable AAS - SSA 51/ SSA 61/ 61z |
407-401.241 |
6 pieces pump tubings for reducing agent / waste Ismaprene |
407-401.590 |
Dosing tube MPE (MFA) |
407-401.590 |
Dosing tube MPE (MFA) |
407-401.590 |
Dosing tube MPE (MFA) |
407-401.735 |
Tygon tube 1000 mm |
407-401.827 |
Sample tray 49 positions for vials with 30 ml, PP corrosion resistant |
407-401.827 |
Sample tray 49 positions for vials with 30 ml, PP corrosion resistant |
407-401.828 |
Sample tray 87 positions for vials with 15 ml, PP corrosion resistant |
407-401.828 |
Sample tray 87 positions for vials with 15 ml, PP corrosion resistant |
407-401.984 |
O-ring flange for gold collector |
407-402.567 |
Glass-sample cups 22 ml, 50 pieces |
407-402.568 |
Cap for glass-sample cups 22 ml, |
407-402.593 |
Tubing guide for dosing tubing |
407-402.594 |
Rider for autosampler arm |
407-402.594 |
Rider for autosampler arm |
407-402.595 |
Sample tray standard / 89 |
407-402.597 |
Inlet tube PTFE (bottle-valve) |
407-402.597 |
Inlet tube PTFE (bottle-valve) |
407-402.598 |
Inlet Tube (nebulizer - autosampler) |
407-402.599 |
Inlet Tube (Tube - Valve) |
407-402.600 |
Cannula complete with guiding |
407-402.601 |
Set - cannula AS 52S complete |
407-402.602 |
Sample tray cover |
407-402.880 |
Sample tray 30 positions for vials with 50 ml, PP corrosion resistant |
407-402.926 |
30 pieces Sarstedt PP- sample vials, 50 mL |
407-402.926 |
30 pieces Sarstedt PP- sample vials, 50 mL |
407-402.927 |
Glass-sample cups 40 ml, 30 pieces |
407-402.928 |
Lid for glass-sample cups 40 ml, |
407-402.971 |
Upper tip, graphite, 3 pieces |
407-403.039 |
Waste tube silicone |
407-403.147 |
O-ring 8,5 x 1,8 for nebulizer |
407-403.158 |
Dosing syringe 500 µl |
407-403.158 |
Dosing syringe 500 µl |
407-403.159 |
Dosing syringe 5 ml |
407-403.159 |
Dosing syringe 5 ml |
407-403.311 |
Apiezon-grease in tube |
407-900.002 |
Capillary hose (rinsing bottle - tubing guide) |
407-A60.066 |
Tool kit novAA400 / novAA 400P / |
407-A63.601 |
Standard nebulizer - nebulizer rate 4…7 ml/min, complete |
407-A63.605 |
Standard nebulizer - nebulizer rate 4…7 ml/min, complete |
407-A65.003 |
Replacement units for gas liquid separator (pointed flask for foaming samples) |
407-A65.022 |
Set O-rings for head |
407-A65.025 |
Pipette tip 200 - 1,000 µl |
407-A65.031 |
Set of 6 pieces O-rings for |
407-A65.03X |
Tube with gold collector with heating element |
407-A65.066 |
Tube set for waste |
407-A65.203 |
Set of 2 pieces quartz window |
407-A65.203 |
Set of 2 pieces quartz window |
407-A65.905 |
Gas tube MPE 50 |
407-A81.011 |
10 pieces graphite tube, coated |
407-A81.018 |
2 Pair graphite electrode (4 pieces) |
407-A81.020 |
5 pieces Graphite pipetting insert |
407-A81.024 |
Graphite shroud, pyro-coated |
407-A81.025 |
10 pieces graphite tube with PIN-platform, coated |
407-A81.303 |
10 pieces solid graphite tube, pyro-coated |
407-A81.320 |
Spectral graphite powder, 25 g |
407-A81.320 |
Spectral graphite powder, 25 g |
702-120.019 |
Hg-cleaning agent 25 g |
702-A54.012 |
Quartz cell without windows |
702-A60.536 |
Tubing for siphon and waste bottle |
702-A61.210 |
Tubing set complete (tubing + |
702-A61.251 |
Silicon tubing |
702-A63.101 |
Spare parts for burner acetylene/air (Ti screw and spacer) |
702-A63.103 |
Spare parts for burner acetylene/N2O (Ti screw and spacer) |
702-A63.204 |
Cleaning rod for burner acetylene/N2O (long version) |
702-A63.204 |
Cleaning rod for burner acetylene/N2O (long version) |
702-A63.614 |
Intake tubing PTFE |
702-A63.621 |
Seals rings for nebulizer |
702-A63.623 |
Seal rings for siphon and mixing compartment |
702-A63.624 |
50 pieces cleaning rods |
702-A63.624 |
50 pieces cleaning rods |
702-A63.625 |
5 pieces cleaning wires |
702-A63.625 |
5 pieces cleaning wires |
702-A63.626 |
Impact bead, 2 pieces |
702-A63.641 |
cap nebulizer (PEEK) |
702-A65.006 |
Titan cannula |
702-A65.021 |
1 piece PTFE reaction beaker with conical bottom, flange seal |
702-A65.036 |
Collar for passing of the heating wire |
702-A65.050 |
Quartzcell HS50 |
702-A65.063 |
Dosing tip, PTFE (only for use of |
702-A65.081 |
Dosing tubing PTFE, 1 x 2 mm, length 250 mm long |
702-A65.094 |
Drying vessel |
702-A65.095 |
Separator |
702-A65.135 |
Exhaust tubing |
702-A81.002 |
Furnace windows, 1 pair (novAA |
702-A81.045 |
Adjusting insert |
702-A81.233 |
Screwed gas fittings, 2 x short |
702-A81.234 |
Screwed gas fittings, 1 x long |
702-A81.314 |
Adjustment aid (external) novAA, contrAA |
702-A81.391 |
IC-graphite shroud solid (necessary for solid sampling), pyro-coated |
702-A81.392 |
Graphite sealing cap for the furnace in the solid analysis 1 pieces |
702-A81.394 |
Adjusting aid (internal) novAA, contrAA |