Shimadzu Shim-pack GIS Series

Lab Product Information
1

Shim-pack GIS Series

Shim-pack GIS Series

High retentivity, lower column back pressure, high inertness

Shim-pack GIS series columns are packed with high purity silica gel and are your ideal generic HPLC columns.
Highly uniform particles ensure stable mobile phase delivery and outstanding low pressure. The Shim-pack GIS series not only reduces your cost of solvents, but relieves your system load as well. A uniform silica surface and stable chemical modification ensure high analysis reproducibility.

Analysis Examples


Food Dyes Peaks

  1. Tartrazine 7.6 mg/L
  1. Amaranth 3.8 mg/L
  2. Ingigocarmine 7.6 mg/L
  3. New coccine 3.8 mg/L
  4. Sunset Yellow FCF 5.3 mg/L
  5. Naphthol Yellow S 7.6 mg/L
  6. Uranine 3.8 mg/L
  7. Allura Red AC 5.3 mg/L
  8. Ponceau R 7.6 mg/L
  9. Ponceau SX 5.3 mg/L
  10. Orange I 5.3 mg/L
  11. Fast green FCF 3.0 mg/L
  12. Brilliant blue FCF 3.0 mg/L
  13. Ponceau 3R 7.6 mg/L
  14. Erythrosine 5.3 mg/L
  15. Azure Blue VX 3.0 mg/L
  16. Orange II 7.6 mg/L
  17. Acid red 3.0 mg/L

Conditions

Column Shim-pack GIS C18 (150 mmL. x 4.6 mmI.D., 4 μm)
Eluent A) 10mM Na2HPO4 (pH6.9 ; 10mM NaH2PO4)

B) CH3CN
A/B = 90/10 - 50 min - 65/35|
|Flow Rate|1.0 mL/min|
|Detection|UV 270 nm|
|Col. Temp.|40 °C|
|Injection Vol.|10 μL|


Free Amino acids and Organic acids Conditions

Column Shim-pack GIS CN
(250 mmL. x 4.6 mmI.D., 5 μm)
Eluent 20 mM KH2PO4 (pH 4.0; H3PO4)
Flow Rate 1.0 mL/min
Col. Temp. 40 °C
Detection UV 210 nm
Injection Vol. 5 μL

Specifications

Shim-pack GIS C18 Shim-pack GIS CN
Bonded Phase Octadecyl Groups Cyanopropyl Group
Analysis Mode Reversed Phase Reversed Phase, Normal Phase
Features High retentivity, lower column

back pressure, high inertness|Suitable in either reversed

phase or normal phase mode|
|Particle Size (μm)|2, 3, 4, 5, 10|3, 5|
|Pore Size (nm)|10|10|
|Surface Area (m2/g)|450|450|
|Carbon Loading (%)|15|14|
|End Cap|○|-|
|Inertness|:arrow_forward::arrow_forward::arrow_forward::arrow_forward:▷|-|
|pH Range|2-7.5|2-7.5|

Shim-pack GIS C18

Analytical Column

Partical Size
(mm) I.D.(mm)
Length(mm) 2.1 3.0 4.0 4.6
3 10 (Guard)* 227-30118-01 227-30119-01 227-30121-01
33 227-30096-05 227-30096-12 227-30096-19 227-30096-26
50 227-30096-06 227-30096-13 227-30096-20 227-30096-27
75 227-30096-07 227-30096-14 227-30096-21 227-30096-28
100 227-30096-08 227-30096-15 227-30096-22 227-30096-29
125 227-30096-09 227-30096-16 227-30096-23 227-30096-30
150 227-30096-10 227-30096-17 227-30096-24 227-30096-31
250 227-30096-11 227-30096-18 227-30096-25 227-30096-32
4 10 (Guard)* 227-30125-01 227-30126-01 227-30128-01
30 227-30097-01 227-30098-01 227-30099-01 227-30100-01
33 227-30097-02 227-30098-02 227-30099-02 227-30100-02
50 227-30097-03 227-30098-03 227-30099-03 227-30100-03
75 227-30097-04 227-30098-04 227-30099-04 227-30100-04
100 227-30097-05 227-30098-05 227-30099-05 227-30100-05
125 227-30097-06 227-30098-06 227-30099-06 227-30100-06
150 227-30097-07 227-30098-07 227-30099-07 227-30100-07
250 227-30097-08 227-30098-08 227-30099-08 227-30100-08
5 10 (Guard)* 227-30131-01 227-30132-01 227-30134-01
30 227-30103-01 227-30104-01 227-30105-01 227-30106-01
33 227-30103-02 227-30104-02 227-30105-02 227-30106-02
50 227-30103-03 227-30104-03 227-30105-03 227-30106-03
75 227-30103-04 227-30104-04 227-30105-04 227-30106-04
100 227-30103-05 227-30104-05 227-30105-05 227-30106-05
125 227-30103-06 227-30104-06 227-30105-06 227-30106-06
150 227-30103-07 227-30104-07 227-30105-07 227-30106-07
250 227-30103-08 227-30104-08 227-30105-08 227-30106-08

  • Guard is including 2 cartridges without Holder. Holder: 227-30532-01

Partical Size
(mm) I.D.(mm)
Length(mm) 4.0 4.6
10 150 227-30111-01 227-30112-01
200 227-30111-02 227-30112-02

Analytical Columns (High-Pressure Series)

Partical Size
(mm) I.D.(mm)
Length(mm) 2.1 3.0 4.6
2 10 (Guard)** 227-30153-01 227-30154-01 —
30 227-30093-01 227-30094-01 —
50 227-30093-02 227-30094-02 —
75 227-30093-03 227-30094-03 —
100 227-30093-04 227-30094-04 —
150 227-30093-05 227-30094-05 —
3 10 (Guard)** 227-30156-01 227-30157-01
30 227-30149-01 227-30150-01 227-30151-01
50 227-30149-02 227-30150-02 227-30151-02
75 227-30149-03 227-30150-03 227-30151-03
100 227-30149-04 227-30150-04 227-30151-04
150 227-30149-05 227-30150-05 227-30151-05
250 227-30149-06 227-30150-06 227-30151-06

** Guard is including 2 cartridges without Holder for High-Pressure. Holder for High-Pressure: 227-30533-01

Preparative Columns

Partical Size
(mm) I.D.(mm)
Length(mm) 10 20 30 50
5 50 (Guard)** 227-30139-01 227-30141-01 227-30142-01 —
100 227-30108-02 227-30109-02 227-30110-02 —
150 227-30108-03 227-30109-03 227-30110-03 —
250 227-30108-04 227-30109-04 227-30110-04 227-30110-05
10 50 (Guard)** 227-30144-01 227-30146-01 227-30147-01 —
100 227-30113-02 227-30115-02 227-30116-02 —
150 227-30113-03 227-30115-03 227-30116-03 —
250 227-30113-04 227-30115-04 227-30116-04 227-30116-05

*** Holder is not necessary.Guard is packed column.